TEN-HIGH CO2 40W 110/220V Laser Engraving Cutting Machine with USB port

Engraving Area: 400x300mm, Suitable for engraving on most organics or NON-metal materials such as acrylic, Plywood, Density board, Leather, Wood, Double color plate, Glass, Cloth, Bamboo, Paper etc. Compatible with WIN7/WIN8/WIN10 system, 32-bit system is the most stable, also suitable for 64-bit. Software: Laser engraving Plug-in CorelLASER & Seal Design Software LaserDRW (included). Compatible with CorelDraw (NOT included).

Pre-installed rotary axis interface and rotary axis switch (This machine Not Include rotary axis), easily extend to rotary engraving. Equipped with an effective ventilation fan for exhaust smoke, and also has the accessories Exhaust pipe. The cooling water temperature is always displayed, safe and convenient.

Build-in Electric Lift-platform, One-button control. Red light positioning system, accurate and efficient. AIR ASSIST & Safety water valve; A Blowing Flame retardant system is used to prevent burning during engraving working & A water shut off protection valve is installed to protect laser tube for interrupt the laser.

The machine's cover equipped with laser suspension protection system, when opening the cover, the laser will stop emitting, safer to operate. USB INTERFACE-This laser engraving machine has USB Interface.

Please follow the steps to do the installation in serious. Communication Interface: USB port; Laser Type: CO2 Gas. Engraving Area: 400x300mm; Laser Power: 40W.

Automatic lifting height: 150mm; Cutting/Engraving accuracy: 0.15mm. Engraving Speed: 0-500mm/s; Cutting Speed: 0-30mm/s. Carving Depth: 0-2mm (Depend on the material); Resolution: Up to 1000 dpi. Cutting thickness: 0-4mm (Acrylic), 0-2mm (hardwood such as Oak, mahogany), 0-3mm (cork such as plywood, plywood, composite board) (Depend on the material).

Software: Laser engraving Plug-in CorelLASER & Seal Design Software LaserDRW. Compatible operating systems: WIN7/WIN8/WIN10 32-bit system is the most stable, also suitable for 64-bit.

Working temperature: 5 40, Working humidity: 5% 95% without condensed steam. Machine size: 810 610 410mm; Net Weight: 50kg. Please note the voltage you request, if not specified, we will send the local voltage of your destination. If you are not sure if the machine meets your needs, please ask online service.

And in order to make sure you have bought the right machine, please tell us the type of material you need to engraving or cutting as well as the patterns after you ordering. We will make samples using the machine that you ordered. And send you the pictures or video of the samples, then you can confirm if the machine meet your requierments.

E lectric automatic lifting system, convenient and efficient, easy to operate. Red light positioning system, once positioned successfully, positioning is visible, accurate and efficient. Adjustable laser power, stable output, powerful power, and variety of choices. Precision metal mold laser head, adjustable laser energy, wear resistant, heat resistant.

Electric lifting systemconvenient and efficient, easy to operate. · The machine need CorelDRAW software and CorelLASER/LaserDRW plug in, we only provide the plug in, so make sure that you have installed the right version CorelDRAW software after you make order (11 to X6 version is available). · The machine cover with laser suspension protection system, when the cover is opened, the laser will stop emitting, it is more safe to operate the machine. 0-4mm (Acrylic); 0-2mm(hard wood, MDF sheet); 0-3mm(soft wood like plywood, composite board), when cutting the maximum thickness, the cutting speed should be so slow.

If you use cutting function frequently, better choose our 80w or 100w machine. Please connect the water inlet and water outlet correctly, otherwise it will have problem when you using the machine.

This machine will not work on any metals. It can only mark on the anodized coating / non-metal surfaces. Make sure the JPG pictures are of high resolution if you're to use JPG pictures, otherwise the patterns to be engraved might be vague. If you want to cut material, please use. The quality of patterns to be engraved depends on a lot of factors: engraving speed, laser power, current amperage etc.

All of which should be set correctly according to your material. Laser Tube: 40W Length 700mm Diameter 50mm. Focal Lens: Diameter 18mm / focal length 50.8mm. Reflection Mirror: Molybdenum Mirror 20mm. This items can only engraving on plane surface.

If you want to engrave on curved, rounded or spherical surfaces, you will need to add an extra rotary axis. We also provide separate rotary axis or machine that equipped with a rotary axis.

Seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing, printing, paper product, garments sampling, etc. Matched: Acrylic, Plywood, Density board, Solid wood, PVC, Leather, Glass, Double color plate, Plastic, Silica gel, Ox horn, Felt, Resin, etc, All non-metal materials. Not apply to metal: Can't engraving metal, Only engrave the coat of paint on the metals. Machine use questions welcome to ask the online service. We will provide a safe and reliable packaging, the damages in the transport link will be compensated and replaced by our part.

Just contact online service in time. : There is no specific time limit for the lubrication of the mechanical parts (reasonable maintenance according to the use of the machine). If engraving and cutting materials what are corrosive or easy to produce dust, it is recommended to lubricate the parts after each use of the machine. If engraving and cutting the wood materials, the parts can be lubricated every 2 weeks (apply lubricant with linen, avoid Direct contact by hands, normal car lubricants can be used).

Lens: If engraving and cutting materials what are corrosive or easy to produce dust, Clean the lens after each use of the machine. If engraving and cutting the wood materials, the lens can be clean every 2 weeks.

Please clean it with cotton swab and stick alcohol. When wiping the lens, pay attention to check if there are any scratches on the lens or if the reflective film falls off.

Laser tube: The laser tube cooling water should be enough, at least 15 liters of water, keep the water cold and cycle it often. Change water every 2 weeks in Summer (Water temperature should not exceed 30 degrees in summer, can put ice in the water to cool down); Change water every 1 month in Winter (be careful not to let the water freeze in winter); When the machine power is high, need to keep the water clean. Before the machine starts working, be sure to Check whether the laser tube through the water normally, otherwise the laser tube will be damaged. We will try our best to give you the best solution by communication. Please repack the item carefully.

Thank you in advance for your patience. Q: Why are your prices so low, are these quality items and brand new? A: YES, you pay the FACTORY PRICE! We sell brand new items directly from factory in Asia.

That is why our prices are so competitive. All items are 100% new and inspected. If your item is not as described or faulty when you receive it we will replace it for you with no additional charge. Thanks for your interest in our products. We hope to develop a strong, long-term, mutually beneficial relationship with you. If you think we can meet your requirements, please send us your order soon. The item "TEN-HIGH CO2 40W 110/220V Laser Engraving Cutting Machine with USB port" is in sale since Friday, January 18, 2019.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "eroslin" and is located in shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Model: TH-40WCO2-430
Country/Region of Manufacture: China
Type: Engraving Machine
Engraving Method: Laser
Brand: TEN-HIGH