TEN-HIGH 430 50W Engraving Cutting CO2 Laser Machine with USB port 110/220V

APPLICATIONEngraving area: 11.8" x 15.7". Capable to engraving on most NON-metal material such as acrylic, plywood, density board, solid wood, pvc, leather, fabric, paper, double color plate, bamboo, plastics, glass, cloth etc.

SUPPORT VARIOUS IMAGE FORMATOpen style software interface, compatible with CorelDRAW. Also support different style image format, like JPG, BMP, PNG, CDR, DXF, PLT, TIF and so on. FUNCTIONSmall model with big energy, laser engraving and cutting function, but if you use cutting function frequently, suggest you choose our 60w, 80w, 100w machine. SAFTYThis is a laser engraving machine, it meets CE standards, and has been independently safety tested. Mm (Depend on the material).

Laser engraving Plug-in CorelLASER & Seal Design Software LaserDRW. WIN7/WIN8/WIN10 32-bit system is the most stable, also suitable for 64-bit.

0-5mm (Acrylic), 0-3mm (hardwood such as Oak, mahogany), 0-5mm (cork such as plywood, plywood, composite board) (Depend on the material). 5% 95% without condensed steam.

Please note the voltage you request, if not specified, we will send the local voltage of your destination. If you are not sure if the machine meets your needs, please ask online service. And in order to make sure you have bought the right machine, please tell us the type of material you need to engraving or cutting as well as the patterns after you ordering. We will make samples using the machine that you ordered. And send you the pictures or video of the samples, then you can confirm if the machine meet your requierments. Red light positioning system, once positioned successfully, positioning is visible, accurate and efficient. Adjustable laser power, stable output, powerful power, and variety of choices. Precision metal mold laser head, adjustable laser energy, wear resistant, heat resistant. Electric lifting systemconvenient and efficient, easy to operate. · The machine need CorelDRAW software and CorelLASER/LaserDRW plug in, we only provide the plug in, so make sure that you have installed the right version CorelDRAW software after you make order(12 to X6 version is available). · The machine cover with laser suspension protection system, when the cover is opened, the laser will stop emitting, it is more safe to operate the machine. This machine will not work on any metals. It can only mark on the anodized coating / non-metal surfaces. Make sure the JPG pictures are of high resolution if you're to use JPG pictures, otherwise the patterns to be engraved might be vague.

If you want to cut material, please use. The quality of patterns to be engraved depends on a lot of factors: engraving speed, laser power, current amperage etc. All of which should be set correctly according to your material.

Laser Tube: 50W Length 800mm Diameter 50mm. Focal Lens: Diameter 18mm / focal length 50.8mm. Reflection Mirror: Molybdenum Mirror 20mm. This items can only engraving on plane surface. If you want to engrave on curved, rounded or spherical surfaces, you will need to add an extra rotary axis.

We also provide separate rotary axis or machine that equipped with a rotary axis. Seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing, printing, paper product, garments sampling, etc. Matched: Acrylic, Plywood, Density board, Solid wood, PVC, Leather, Glass, Double color plate, Plastic, Silica gel, Ox horn, Felt, Resin, etc, All non-metal materials. Not apply to metal: Can't engraving metal, Only engrave the coat of paint on the metals. Machine use questions welcome to ask the online service. We will provide a safe and reliable packaging, the damages in the transport link will be compensated and replaced by our part. Just contact online service in time. : There is no specific time limit for the lubrication of the mechanical parts (reasonable maintenance according to the use of the machine). If engraving and cutting materials what are corrosive or easy to produce dust, it is recommended to lubricate the parts after each use of the machine.

If engraving and cutting the wood materials, the parts can be lubricated every 2 weeks (apply lubricant with linen, avoid Direct contact by hands, normal car lubricants can be used). Lens: If engraving and cutting materials what are corrosive or easy to produce dust, Clean the lens after each use of the machine.

If engraving and cutting the wood materials, the lens can be clean every 2 weeks. Please clean it with cotton swab and stick alcohol. When wiping the lens, pay attention to check if there are any scratches on the lens or if the reflective film falls off.

Laser tube: The laser tube cooling water should be enough, at least 15 liters of water, keep the water cold and cycle it often. Change water every 2 weeks in Summer (Water temperature should not exceed 30 degrees in summer, can put ice in the water to cool down); Change water every 1 month in Winter (be careful not to let the water freeze in winter); When the machine power is high, need to keep the water clean. Before the machine starts working, be sure to Check whether the laser tube through the water normally, otherwise the laser tube will be damaged.

Ss Border Trade powered by Channel Eff. Please make sure the address is correct when ordering. If you are satisfied with our products and service, Please. We will make our efforts to help you.

The item "TEN-HIGH 430 50W Engraving Cutting CO2 Laser Machine with USB port 110/220V" is in sale since Tuesday, April 12, 2016. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "eroslin" and is located in Shenzhen, Guangdong. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Net Weight: 55kg
Working temperature: 5 40
Working humidity: 5% 95% without condensed steam
Model: TH-CO2-430-50W
Country/Region of Manufacture: China
Machine Operation: Electric
Material: Metal
Engraving Application: Gift Personalization
Country of Manufacture: China
Application: Laser Engraving
Type: Engraving Machine
Tool Type: Sharpening Kit
Engraving Method: Laser
MPN: Does Not Apply
Power: 50 W
Brand: Ten-high
Engraving area: 11.8" x 15.7"
Engraving Speed: 0-500mm/s
Cutting Speed: 0-30mm/s
Carving Depth: 0-2mm (Depend on the material)
Machine size: 930 * 610 * 410mm