Adopt the latest 5.5W laser shaping technology diode laser, with ultra fine 0.06mm laser focus, the thickest can cut 15mm thick wood, 10mm acrylic, engraving ceramics and stainless steel. Combines fixed focus lens and sliding design, you only need to slide the laser and tighten the screws to complete the focusing, which makes it very easy to use the laser. The all metal structure design makes the laser engraver sturdy, and at the same time it improves the accuracy of the engraving. The installation can be completed within 10-20 minutes, and it is easy to replace.
The laser filter cover filters 98% of the ultraviolet light to the eyes, you can watch laser engraving without wearing goggles. At the same time it can prevent animals from catching the laser spot. The laser engraver is compatible with various mature engraving software, such as for LaserGRBL, for LightBurn, etc. Supports PWM mode engraving, supports for Windows and for iOS system (for LightBurn). The machine is equipped with safe power switch, and fixing holes are reserved on the 4 feet and the body structure to facilitate fixing the machine and the data cable.
X axes and Y axes contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly, and the 410x420mm large area engraving interval can meet more engraving needs. 410 x 420mm / 16.1 x 16.5in. Engraving Materials: Wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, 304 Stainless steel, ceramic, dark stone. Cutting Materials: Wood, acrylic, cardboard, fabric, bamboo, plastic board, KT board. (Cutting effect compared to 90W CO2 laser).
Machine Electricity Power: 30W (It has nothing to do with cutting or engraving performance, just electricity consumes). Diode Laser Power: 5.5-6W (Please note that this is light energy and not electric energy). Laser Wave Length: 450 ± 5nm. Focusing Method: Fixed Focus Laser + Sliding Device.
Laser Protective Cover: The light filter cover on the laser protects the user eyes and prevents animals grabing the laser spot. Operating Software: For LaserGRBL, for LightBurn, for LaserGRBL, for LightBurn, for Benbox, for Grbl Controller, for LiteFire, support for Windows system, support for iOS system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data Transmission Method: USB connection. Power Supply: International Universal Standard Power Input: 100-240V AC, 50/60HZ, Output: 12V 5A.
Certification: CE FCC RoHS FDA IEC Certification. 1 x X Axes Assembly. 1 x Control Box Module Set. 1 x Laser Module Set. 1 x 12V 5A Power Adapter.
1 x Step 1-5 Screw Installation Package. 1 x T Shaped M5 Hex Screwdriver. 1 x L Shaped M4 Hex Screwdriver. 1 x L Shaped M3 Hex Screwdriver. 1 x 8-10mm Screw Wrench.
1 x 10x10cm Wood Chip 3mm Thickness. 1 x 10x10cm Wood Chip 10mm Thickness.1 x A4 Size Steel Desktop Protection Pad. For detailed machine instructions, please refer to the user manual for parameter settings.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours.
If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls.
Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "bettershopping360" and is located in this country: CN. This item can be shipped worldwide.