SCULPFUN S6 Pro 60W Laser Engraver Desktop DIY Laser Engraving Cutting Machine

Unique Spot Compression Laser: Uses the latest 5.5W diode spot compression laser, with an ultra fine squares laser focus, cutting penetration and accuracy are twice that of general lasers, engraving traces are also finer, and the cutting and penetrating ability is stronger. Fast Fixed Focus Design: Has the fastest focus design on the market, combines a fixed focus lens and sliding design. You only need to slide the laser and tighten the screws to complete the focusing, which makes the use of the laser very simple. Sturdy Structure Design: All metal structure design makes the machine sturdy, and improves the accuracy of engraving.

The whole structure is designed for quick installation, can be completed within 10-20 minutes. The structural frame is very durable and remains open. Eye Protection Design: The laser filter cover filters the ultraviolet light to the eyes, so you and the people around you can watch laser engraving without wearing goggles.

At the same time, can prevent animals from catching the laser spot. Extensive Compatibility: The machine is compatible with various mature engraving software, such as for LaserGRBL, for LightBurn, for Benbox, for GrblController, for LiteFire, supports PWM mode engraving, supports for Windows system, engraving file format supports for JPG, PNG, DXF, AI, SVG, etc.

Safe Design: The machine is equipped with very comfortable power switch, which is not available in others. The 4 feet and the body structure are reserved for fixing holes to facilitate the fixing of the machine and the data cable. A4 Steel Pad: Free A4 size steel pad protects table from laser damage. Isolate the sealed fire hazard, and the X, Y axes contain precise graduation lines, convenient for quick measurement of size of engraving, large area engraving interval meet your various engraving needs.

410 x 420mm / 16.14 x 16.54in. Engraving Materials: For wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, pitch black metal, dark ceramic. Cutting Material: For thin board, acrylic board, cardboard, non woven fabric, bamboo, some plastic board.

Laser Effect Power: 60W (Cutting effect comparable to 60W CO2 laser). Machine Maximum Electrical Power: 30W (Nothing to do with the engraving or cutting performance, but the power consumption). Diode Laser Output Power: 5.5-6W (Please note that this is light energy, not electrical energy). Focusing Method: Fixed Focus Laser + Sliding Device.

Laser Protective Cover: The purple light filter cover on the laser protects the user's eyes and prevents animals, etc. From contacting the laser spot.

Operating Software: for LaserGRBL, for LightBurn, for LaserGRBL, for LightBurn, for Benbox, for GrblController, for LiteFire, support for Windows system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data Transmission Method: USB Connection. Power Supply: International Universal Standard Power Input: 100-240V AC, 50/60HZ Output: 12V 5A. Certification: CE FCC RoHS FDA ICE Certification.

1 x X Axes Component. 1 x Control Box Components. 1 x 12V 5A Power Adapter.

1 x Step 15 Screw Installation Package. 1 x T Shaped M5 Hex Socket Screwdriver. 1 x T Shaped M4 Hex Socket Screwdriver. 1 x T Shaped M3 Hex Socket Screwdriver. 1 x 8-10mm Screw Wrench.

2 x 3mm Thick 10x10cm Small Wood Chip. 1 x A4 Steel Desktop Protection Pad. For detailed machine instructions, please refer to the user manual for parameter settings. When operating the laser engraving machine, please install the laser protective cover, if not installed, you need to wear goggles. Do not touch the laser with your hands, otherwise may burn your hands. Please avoid strong impact on the machine.

Children under 14 years old are prohibited from using. Children over 14 years old need adult supervision.

Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser. Instead of leaving negative/neutral feedback or opening a dispute.

Our listing price includes the value of goods, packaging cost, and export. Please check with your country's.

We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls.

Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "ananxinxin45" and is located in this country: CN. This item can be shipped worldwide.

Brand: Unbranded/Generic
Engraving Method: Laser
Engraving Size: Approx.
410 x 420mm
Machine Operation: Electric
Model: SCULPFUN S6 Pro
Power: 60W
Style: U. regulations
Type: Engraving Machine