SCULPFUN S30 Pro 10W Module for Laser Cutting Machine Wood Acrylic X0G2

  

Wide Compatibility: With an ingenious and highly compatible structural connection device, S30PRO module can be well adapted to different engraving machines, cutting machines, DIY 3D printers, milling machines, etc. Compatible with SCULPFUN S9/S6pro/S6, ATOMSTACK A5/A5Pro, (version) engraving machine.

Ultra-fine and high-density 10W shaping technology: The of S30 Pro is increased to 10W, which is twice that of S9. But getting the same 0.08mm ultra-fine beam as the S9 means that the S30 Pro has higher energy density, cutting penetration and engraving capabilities. Powerful High-Speed Air Assist: S30 Pro is equipped with an high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance.

Detachable eye : Equipped with a detachable eye, which will not even without glasses. Also, if you don't need it, you can easily disassemble it. &Cleaner: Combining high-speed air assist and 10W high-energy density, high-density woods such as can be cut; And the cutting surface is cleaner with powerful airflow blows away the residue, free of any.

Universal /PWM modulation board: It uses a common /PWM modulation board, which can be adapted to common GRBL or motherboards. See product pictures for details. Specification: Module: SCULPFUN S30 Pro module Set For: engraving machines such as SCULPFUN S9/S6pro/S6? (Version), ELEKSMAKER, or DIY 3D printers, machine tools. Engraving Materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF,, cardboard,, leather, board, oxide, 304 stainless steel, ceramic, dark stone Cutting Materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some boards, boards Output : 10W (energy) Inner diameter of Air : 7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, out diameter of nozzle:8mm) Wavelength: 455±5nm Type and Fixed : fixed , fixed through 50mm measuring column Material: alloy circuit board Circuit Board Size: 4040mm Circuit Board:/PWM modulation board Input voltage: Max Input of module: 5A Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC). Fan: 0.15A 4020 fan Fan speed: 15000 rpm Operating : -20? Package Weight: 0.6kg/21.1oz Package Size: 305x150x125mm/12x5.9x4.9in. How to judge whether the S30 Pro is suitable for use? You need to pay attention that the input voltage of the S30 Pro is, and the S30 Pro is a 3pin interface, you can check the detailed pictures. Because of the powerful of S30 Pro, it is forbidden to run the engraving machine unattended.

Pause it if you're not around. For detailed machine instructions, please refer to the manual for parameter settings. When operating the engraving machine, please install the protective cover; if it is not installed, you need to wear.

Do not the with your hands, otherwise you may burn your hands. Please strong impact on the machine.

It is forbidden for children under 14 years old to use this product, and over 14 years old need attended. Do not use the directly on any specular reflection object, which may cause injury to the operator or burn the. Packing List: 1 x 7.5mm inner diameter air tube 1 x acrylic protective cover 1 x S30 Pro head 1 x Multi-function connector 1 x 50mm measuring column 1 x Screw and tool kit. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "tomorrowhome" and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.

1. Brand: SCULPFUN
2. ASIN: B0BNHV42WP
3. MPN: BWV7687688249635SG