Ruida RDC6332NM Laser Engraving Control System For Non-Metal Auto Cutting Head

  
Ruida Non-Metal Automatic Heightening Laser Cutting And Engraving Control System RDC6332NM For Non-Metal Automatic Cutting Head. Non-metal automatic height adjustment laser control system, integrated non-metal automatic height adjustment device, can complete the automatic height adjustment processing of uneven or non-metal working surface. Two digital laser control signals (1) Differential output, TTL level, 20mA drive capability; (2) The PWM frequency is adjustable from 2.5K to 100K; (3) The PWM duty cycle is adjustable from 2% to 98%; 2. Two analog laser control signals 0 5V automatically follow and adjust; 3. Differential output of motor control signal, TTL level, 20mA drive capability; 4.

The maximum motor control pulse frequency is 500KHZ; 5. The maximum USB transmission rate is 12M, and the longest distance is 5 meters; 6. Linear / circular / B-spline interpolation accuracy +/- 0.5 pulse; 7.

4-channel general photoelectric isolation OC gate output, maximum 300mA drive capability, can directly drive the relay. Ethernet (10 / 100M) and USB2.0 transmission; 2.

3.5-inch true-color TFT screen, which can display true-color processing graphics on the panel, and at the same time can accurately know the coordinate position of the laser head processing on the panel; 3. The file graphics saved in the memory can be previewed on the panel, and the screen speed is fast; 4.

Can dynamically display the track processing progress and coordinate points; 5. The processing parameters such as speed, power, etc. Of each layer can be directly modified on the operation panel, and the modified layer parameters can be automatically saved for future use; 6. Support power-off and engraving, working time preview (accurate to the millisecond level, the working time preview value is exactly the same as the actual work time); 7.

Support functions such as feeding, lifting, rotary engraving, and left and right push plates; 8. The system has better hardware stability and better anti-high voltage and anti-static interference characteristics; 9. The controller uses a more complete and optimized motion control algorithm, which has higher processing speed and efficiency; 10. Expansion port is reserved, which can be connected with Ruida wireless controller device for wireless control; 12. Cooperate with Ruida's non-metallic height-adjusting system, and apply to the non-metallic cutting field where the laser head follows the movement.

Laser power control: analog voltage, 05V adjustable according to the motor control signal differential output, TTL level, 20mA driving capability, the max. Motor control pulse frequency is 500KHZ. Digital laser control signals, differential output, TTL level, up to 20mA driving capability. PWM frequency can be adjusted from 2.5KHz to 100KHz. PWM duty ratio is 1%99%. Transmission speed is 12 Mbps, the longest distance is 5 meter. 5.4-way general photoelectric isolation OC gate output, the max.

Linear/ circular/B Spline interpolation precision: +/-0.5pulse. 7.4-way general photoelectric isolation, TTL level.

S&H will be determined based upon your address. If you have any problems or concerns to your order or products, please message us and give us a chance to assist before you leave any feedback.

We believe that we can produce a positive outcome to any situation to earn your likes.