Laser Engraving Cutting

Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide


Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide

Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide    Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide
Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide. New launch HL-1060 DSP 100W laser RDC6445 off-line with high-speed High configuration. The use of high-tech control system, Imported lens and reflector system. Use USB 2.0 off-line. CAD and RDworks and CoreldRAW software , variety of software typesetting engraving.

Using professional high quality laser power supply and. The RDC6445 advantages of High-speed offline board configuration. It supports RDworks and CoreldRAW and CAD software to engrave and cut. The Engraving and cutting color separation work at the same time.

The different colors can be set for different engraving and cutting speeds. File formats supported by RDworks software. The Independent DSP system, can work without a computer. Insert USB flash disk, automatic. 1 x DSP 1060 100W C02 Laser engraving machine.

1 x Laser engraving software (down load link). 1 x User Manual (down load link).

1 x Air exhaust fan. 1 x Communication cable and USB cable. Can the machine engraving and cutting? Yes, even on the same Job, you can do setting with different colour in the software. Is the machine must work with computer?

Must connect with computer with USB cable when you change the settings of machine. For the design files, you can transfer the file with USB memory stick to the machine, Or can download it to the machine directly with USB cable from computer.

Can the machine be split so it can fit into my doors? Sorry, it can't do. How long the laser tube is working well?

Unfortunately we cannot confirm about this, it is about 0-7200 hours. Do you avaliable spare parts? We can provide all of spare parts of any model we listing. I have heard the mirrors need cleaning? Yes they do but not after every job, once a week is normally enough.

Can I put larger materials in the machine? No, the machine have not doors which opened to accommodate larger materials.

How about the after sell service? Free tech support for the whole life of the machine, and 24 hours telephone support. If the laser tube damaged in the transport. Original packaging is present for most New items but certain items may be re-boxed.

The item may show some limited signs of wear with small scratches or cosmetic blemishes. Warrants your product for a period of. If you discover a defect.

Replacement parts, replaced by user. Should the product(s) fail, your sole recourse shall be repair or replacement, as described in the preceding paragraphs.

We will not be held liable to you or any other party for any damages that result from the failure of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, lost data, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. By installing or using the product, the user accepts all terms described herein. After you confirm all of your information are correct. We have Laser Engraving Machine.

Fiber Laser Marking machine, CNC Engraving Machine. We have our own engineer. The item "Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide" is in sale since Monday, March 8, 2021. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".

The seller is "ussigns" and is located in Raszyn. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  1. Brand: HLJ laser cut
  2. Model: HL-1060
  3. MPN: Does Not Apply
  4. Country/Region of Manufacture: china
  5. Auto-focus: Yes
  6. Lifting platform: 0-200 mm
  7. Engraving speed: 0-300mm/s
  8. Laser tube working time: 0-7000 hour
  9. Working area: 600*1000 mm
  10. Laser tube brand: 100% Reci W2 laser tube
  11. Resolution: 1000 DPI
  12. Location precision: 0.01mm
  13. PC Interface: USB 2.0 and USB Disk
  14. Laser power: 100W
  15. Max speed: 500mm/s
  16. System environment: WINDOWS XP/WIN7/WIN8/WIN10
  17. Laser tube type: CO2 Glass sealed laser tube
  18. Min shaping character Character: 2*2mm, Letter: 1*1mm
  19. Color separation: YES
  20. Transfer method: X Linear guide
  21. Machine Weight: 135KG
  22. Machine Dimensions: 140*94*64cm
  23. Cutting Speed: 5-20 mm (different material differ)
  24. Engraving Method: Laser engraving
  25. Type: CO2 Laser
  26. Lifting platform 1: honeycomb platform
  27. Lifting platform 2: blade platform
  28. Warranty: 1 year
  29. Control software: RDworks/Lightburn
  30. Engraving Application: Signs
  31. Power: 100 W


Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide    Ruida DSP1060 100W Co2 Laser Cutting Engraver Machine Auto Focus X Linear Guide