Laser Engraver Laser Cutter X700C (700500mm) with CE, FDA. 28'' x 20'' Working Size. Working size: 20x 28(500mm x 700mm) with double side open door.Laser tube type: Co2 Glass sealed laser tube. Driver type: Micro Stepping Motor. Adjust table: Motorized up and down table. PC Interface: USB2.0 and USB Disk. Image form: HPGL, BMP, DXF, GIF, JPG, JPEG, DS T, AI. Equipped with high-speed DSP control system, USB2.0 interface outputting directly, intelligent software, support Autocam, Coreldraw Ect. High power CO2 laser tube, equipped with imported mirrors, lens, prolong the service life. The speed and laser energy can be adjusted anytime, very easy to operate. Good water protection system, ensures the services life of laser tube efficiency. High moving accuracy in high speed by step motor and transmitting system. (01) Laser Engraving software Package (English Version). 06 3 Reflect optics (installed in the machine). (07) 1 Focus optics (installed in the machine).
We don't provide a door to door service. Q: Do I need two laser machines to engrave and cut separately?A: No, the laser machines we provide are capable of both engraving and cutting. One machine alone can fulfill the two purposes. Q: Do the laser machines need to be connected to a laptop or desktop computer to work? A: Yes, either is ok. It supports Windows 10, Windows 2000, Windows XP, Win 7, and other operating systems Q: What kind of graphic format does it support? A: JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW , etc. Q: How to distinguish laser tubes with different powers and applications? Laser tube length (relatively speaking, the longer, the bigger) 2. Laser tube diameter (relatively speaking, the thicker, the bigger) 3. The bigger a laser tube power is, the deeper the machine can cut, but its light spot is bigger.
So, it is better to use a machine with a low-power laser tube to engrave, such as 40W, 50W or 60W. Q: Is it better to increase blow to improve laser processing performance? A: For some thick materials, it works.
But, when carving some other materials, you need to blow less. Q: How long will it take to learn to operate a laser machine? A: If you are able to use some basic graphic design software, it will only take a few hours to master the operation. You just need to do some simple tests on different processing materials to know how to set the correct speed and laser power.
Q: Is a laser machine in operation harmful to our bodies? A: It is not harmful as long as the laser is not exposed directly to skin and eyes. Provide service free for the machine all the life. The item "RDworks 100W CO2 LASER ENGRAVING Laser CUTTING MACHINE 28'' x 20'' CE FDA" is in sale since Thursday, August 6, 2020.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "bestlasershop" and is located in CN. This item can be shipped worldwide.