True 20W Optical Power Laser Engraving Module. LUNYEE LM-L20 laser module has the latest diode laser technology and has a real 20-22W output power. This laser module can cut 10mm plywood or 8mm black acrylic at one time, and can quickly cut 0.05mm at a time of 1500mm/min Stainless steel. Excellent cutting ability, bring you a better using experience. Professional air-assisted and heat-dissipating design.
The laser engraver and cutter machine module kit tools includes two air pipe joints with inner diameters of 6mm and 8mm, and a professional air nozzle for air-assisted cutting. The use of air-assisted cutting makes the edge of the cutting material smoother and cleaner while improving the efficiency of laser cutting.
This laser adds a new heat dissipation module design and high-quality heat dissipation aluminum block to optimize the heating problem of lasers on the market, making the laser output more stable and not affected by temperature. Four 5W laser beams are compressed and aggregated into one stable 20W output laser beam, quadruple compression condensing light coupling technology, the light spot is compressed to 0.08mm0.10mm (Real Size), making cutting more powerful and engraving more powerful precise.The laser module can cut 0.1mm stainless steel plate. Coated glass, mirror back, stainless steel, black acrylic, cardboard, plastic, leather, aluminum oxide, non-reflective galvanized and lacquered metal, blackened clear glass, plywood, pine board, wood, solid wood, stone, bamboo. It is impossible to engrave non-oxidized aluminum, materials whose color is similar to the laser color. Pre-sale instructions: Please make sure your engraving machine can provide 24V 3-3.2A power supply before purchasing. Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone. All kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards. LaserGRBL, LightBurn, LaserGRBL, LightBurn, GrblController, support Windows system, support MAC system.
Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. The laser module is equipped with an original diode and has Compressed. Which can achieve 0.080.08 ultra-fine spot.
Remove the air assist valve when engraving. Using a dedicated laser focal length fixed focal length column, the focal length can be fixed efficiently and quickly on different working surfaces. 4 Beam compression technology, 20W ultra-strong optical power laser module? Cut through 10mm bass plywood by one pass Cut through 20mm pine plywood by 2 passes Cut through 5mm MDF by one pass Cut through 8mm black acrylic by one Pass?
With air nozzle to get clean-cut edges, improve cutting performance? The length of the laser line is 80cm, the terminals are 4P-3P, 3P is connected to the control board, and 4p is connected to the laser?
Excellent heat dissipation design, keep stable cutting ability and extend service life? Only 300400mw power decrease with 100% power output in 30mins?
Include a 33mm Lifting, compatible with various DIY cutting engraving machines? Mode:LM-L20 Optical Output:1921W Wavelength:455(±5mm) Laser Spot :0.08 0.10mm Input Voltage/Current:24V=3A Light Path: Focused Beam Laser Beam Mode:Dotted Laser Diode:4 Beam Focal Length:40(±1mm) Laser Cable:80cm 3p-4p Working Mode:Pulse work Working Temperature:0?Working Time: 10000H Housing size:6668149mm Optical Lens:f10/glass Fan:24V 7500rpm Product Material: Aluminum 6061 Weight:0.7kg. Free lifting module, compatible with various types of laser engraving machines.
The laser light emitted by the laser module is likely to injure persons'eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working. Laser module needs an appropriate laser driver(PCB). When the laser module connects with power supply, please set the output voltage to zero. The adjustment of the current should be slowly increased or decrease to avoid damaging the device.
Keep the device working or storing in a dry environment. The anti-dust grade is over one million, in order to prevent dust inside the lens to affect the laser dot shape. Working at high temperatures will increase the threshold current, reduce conversion efficiency and speed up the aging of the device. When output power is higher than it's specific parameter of operation, it will accelerate the aging of the device.
When the operation temperature of the laser diode is over 70degree, please do well heat dissipation of it. This laser module is an electrostatic sensitive device. Please make sure ground yourself or wear an antistatic wrist strap before you take it.True 10W Optical Power Laser Engraving Module. Laser Wavelength: 445nm±5 (blue viole). Drive mode: External ACC constant current drive. Cooling Method: Forced air cooling. Shell Material: Aluminum, Surface Anodized. About laser wire: red "12V+", Black "GND ", yellow "PWM", When connection, please pay attention to that. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical/Lab Equipment Attachments & Accessories\Lamps, Bulbs & Laser Components\Laser Modules & Heads". The seller is "bxgs5761" and is located in this country: CN.
This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.