DAVI D35L RF-CO2 Galvo Laser Marking Machine 35W RF Laser Tube RC2808 20mm Ezcad

  

The 30W CO2 laser source has a superior laser beam with a small divergence angle, integrated laser structure, and stable. The 30W CO2 laser machine has a high-speed galvanometer scanning system. It's easy to operate, highly reliable, and. With a long lifespan of over 45,000 hours.

The 30W RF CO2 laser equipment is highly efficient and operates at a low processing cost. It covers a large marking area and produces remarkably high accuracy and.

10.55 - 10.63. 1.8 ± 0.2. 7.5 ± 0.5.

Dimensions (L x W x H) (mm). 357 x 92.5 x 142. Max Long-Term Drift (Continous working for 8 hours). Position Signal Input Scale Factor. Position Signal Ouput Scale Factor.

The laser source was tested before sent. But, it is still 0.7% case happened because.

DAVI D35L CO2 Laser Marking Machine x 1. Tolls bag (pedal, spanners, power cable) x 1.

D80 Rotary Axis x 1. Additional 110x110mm Lens x 1.

400x400mm(±5mm) Honeycomb Table x 1. 1 Q: What material is the machine shell made of? A: The shell of the machine is made of aluminum alloy instead of iron. It is stainless and has longer service life. 2 Q:What software of fiber laser maker support?

A:The machine use the EZCAD2 software. 3 Q: Is the laser compatible with lightburn software? A: Our fiber laser is equipped with EZCAD2 software and it is compatible with lightburn. 4 Q: Does this system come with ezcad2 software?

If not, where do I get it and drivers for win 10 pro? A: Ezcad2 software is able to download from our website also driver.

Dongle is no need as we use genuine JCZ control board. 5 Q; What are computer operating system requirements for running HL laser fiber laser machine? 6 Q: Is the software compatible with mac? I only saw windows but before purchasing this i need to be sure because all I own are macs.

A: Hello, our marking machine software compatible with lightburn, if you use lightburn, it can be compatible with mac. 7 Q: Do you sell spare parts? A: Yes, we sell spare parts as well, such as lens, Galvanometer etc. 8 Q: Are your machine certified? A: The HL laser fiber laser machine is CE&FDA certified.

9 Q: I have no experience. Is it easy to use? A: Yes, HL laser focus on Fiber laser and Co2 laser machine for more than 10 years. Of videos to help you setup laser machine.

Also, we send you the marking parameter for some materials. 10 Q: What can I do with RF CO2 Laser Marking Machine?

A: RF CO2 Laser is an exciting tool utilizing relatively new technology. RF CO2 laser could be adjusted for use on many different materials. Majority of nonmetal materials such as leather, cloth, wood, bamboo, paper, organic materials, plastic, epoxy resin etc.