Which can be comparable to the effect of the 150W CO2 laser engraving machine. No need to adjust the focus before engraving;The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement.
410x400mm large area engraving interval can meet your various engraving needs. The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAC system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Uses an integrated screw rod which makes the movement of the laser more precise and the coupling more durable. Support offline engraving; In the event of an unexpected situation, stop the machine at any time to make the engraving safer.The laser sintering temperature is up to 1200? Model: ATOMSTACK S10 PRO Print Size: Recommend Print Size 410400mm Carving Objects:Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate; Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge. Laser power: 50W Laser output power: 10-11W. Wave Length: 445 ± 5nm Engraving accuracy: 0.01mm Focusing method: fixed focus laser, no need to focus Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot. Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.
Input Format: NC, BMP, JPG, PNG, DXF, etc. Data transmission method: USB connection. Input Voltage: AC100-240V, 50/60Hz Output Voltage: DC12V, 5A Package Size: 59.53513cm/ 2313.85.1in. Package Weight: 5.77kg/12.7lbs.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine.Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. 1 x Tool Kit 4 x Foot Pad Foam 1 x Film 3 x Acrylic Sheet 3 x Wood Chips 10 x Wire Tie 1 x Desiccant 1 x Brush 1 x Clean Cloth 1 x Card Reader 1 x TF Card 1 x Power Adapter 1 x Instruction 1 x Data Line 1 x Touch Screen Components 1 x High-Definition Multimedia Interface Cable 1 x Laser Module 1 x Cutting Pad 1 x X Axis Assembly 1 x Y Axis Left Profile 1 x Y Axis Right Profile 1 x Profile On The Base 1 x Under The Base Profile 3 x Foot Bracket.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "rideksshop" and is located in this country: CN. This item can be shipped worldwide.