Atomstack D2 Air Purifier 7-layer Filter Laser Cutting Engraving Fume Extractor

  

Designed for laser cutting: Atomstack Maker D2 air purifier, a 7-layer filter element specially developed for laser cutting, can effectively filter the odor and harmful substances generated by laser cutting, with a filtration rate of 99.97%. Contribute to environmental protection: Discharging the cutting waste gas directly into the atmosphere will cause more pollution, and use an air purifier to make the air fresh. Healthy creation: Use Atomstack Maker air purifier to say goodbye to all polluting gases: PM2.5/PM10/formaldehyde/TVOC, etc.

Health is priceless, for the health of you and your family, please do a good job of safety protection. Break through the limitations of the working environment: no longer need to worry about the laser cutting work site, use the protective cover and air purifier of Atomstack Maker D2, no need to worry about smoke exhaust and air pollution, just in your garage, basement, workshop safe job. Long life: A single filter element can be used for about three hours a day when it is cut on a normal laser board, and it can work continuously for 3-6 months, and the single continuous working time can reach 200H, giving you long-term and efficient protection.

Easy to replace: only three steps, no need to disassemble the circuit, and quickly replace the filter element in one minute. High adaptability: Atomstack Maker purifier can be adapted to all Atomstack and Ortur, NEJE, xtool, Sculpfun and other brands of protective box products.