ATOMSTACK A20 PRO 130W Laser Engraver Machine 25mm Cutting Acrylic Wood Engrave

ATOMSTACK A20 PRO 130W Laser Engraver Machine 25mm Cutting Acrylic Wood Engrave. Atomstack X20 Pro Laser Engraver 130W Effect High Precision Laser Laser Engraving Machine with Air Assist System Cutting 25mm Wood 32-bit Motherboard Ultra-Fine Fixed-Focus. Orders will be processed within 48 hours. Fixed focus laser, no need to focus.

Protect the user's eyes and prevent pets from grabbing the laser spot. CE, FCC, RoHS, FDA, PSE. LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. NC, BMP, JPG, PNG, DXF, etc.

SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, etc. The laser output power soars up with the latest generation of four 6W laser coupling technology, is able to cut off 12-15mm thick tungsten board as well as the 8mm thick black acrylic board with only one pass, and even cut the 0.05mm thick stainless steel sheet. F30 Pro upgraded Air assit kit? The product comes standard with the F30 Pro upgraded air assit kit: the cutting capacity is greatly improved, as well as the cutting.

Is optimized to a considerable extent. 32-bit motherboard: built-in 256-bit color scale. Achieving the finer engraving result and higher contrast effect. Now your projects are no longer in black only!

There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. The new X20 laser has a built-in tool-free focusing module as well as a built-in air-assist system, enjoy the concise beauty and cordless freedom. Upgraded compression spot coupling technology? Ultra-fine laser focus area is reduced to 0.080.1mm, high-density laser can easily cut 25mm thick wood, 30mm thick black acrylic. Can directly engrave mirror stainless steel metal, ceramics, glass, and engraving &The cutting speed is 40% higher than the ordinary model, which can be comparable to the effect of the 300W CO2 laser engraving machine.

The new filter panoramic glass eye protection? The panoramic filter glass protective cover plays a very good role in protecting your eyes. Filtering 97% of the ultraviolet light. You and the people around you do not need to wear goggles, you can also watch laser engraving. No need to adjust the focus before engraving;The focal spot area of the new laser is only.

Of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support For MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. The machine uses an integrated screw rod instead of a combined coupling.

The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable. New laser with knob: It is more convenient and quick to adjust the height of the laser. ATOMSTACK X20 PRO configures the terminal control panel, supports offline engraving, you can carry out engraving work anytime and anywhere without being restricted by the computer. In the event of an unexpected situation, stop the machine at any time to make the engraving safer.

Modular design of the body mechanism, only need to replace the frame components, you can get. When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand.

Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.

We have CE, FCC, RoHS, FDA Certifications, 100% Original Brand Products. If you have any questions, please contact our 24-hour online customer service on aliexpress or Facebook official communication group.

If you like our products and company, please stay????? Comments, we will continue to provide consumers with perfect products and services. Order information will be updated when. After you win the item OR place a new order.

After you pay item successfully. Or if you need to find anythings, we will help you to find it and give you our best price.

If you we are not satisfied with the product or service, please contact me and don\'t give us negative or natural feedback, We must give you a satisfactory solution. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "maikeweier01" and is located in this country: CN.

This item can be shipped worldwide.

Tool Type: Metal engraver
Name Tag Style: Magnetic
Custom Bundle: No
Material: Aluminum
Modified Item: No
Engraving Application: Gift Personalization
Brand: atomstack
Personalize: Yes
Engraving Method: Laser
Application Shape: Rectangle
Type: Engraving Machine
Machine Operation: Computer Numerical Control (CNC)
Model: A20 PRO
Laser output power: 20W
Country/Region of Manufacture: China
Power: 130W
Personalization Instructions: Cut 25mm wood only 1 passed