ATOMSTACK A10 Pro Comprehensive Product Upgrade Dual-Laser Technology 150W CO2 Laser Effect. Support Offline Engraving Super Control Motherboard. Welcome To ATOMSTACK Official Store , Please Note.
Any question, please contact with us! A10 Pro Upgraded dual compression spot coupling Laser technology high-density laser can easily cut 20mm thick wood, 15mm thick black acrylic. Directly engrave mirror stainless steel metal, ceramics, glass.The effect of the 150W CO2 laser engraving machine. Configures the terminal control panel, Emergency stop button, Stopper, Reset switch. Upgraded dual compression spot coupling technology. Ultra-fine laser focus area is reduced to 0.080.08mm, high-density laser can easily cut 20mm thick wood, 15mm thick black acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, and engraving &The cutting speed is 40% higher than the ordinary model, which can be comparable to the effect of the 150W CO. The laser sintering temperature is up to 1200?
Eye-Protection Flame-retardant Filter Panoramic Glass. The flame-retardant filter panoramic glass can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes.You and the people around you do not need to wear goggles, you can also clearly Watch laser engraving. Reduce the cost of your goggles and the inconvenience of wearing goggles. The glass is flame retardant and safer to use. Solid And Easy Installation Structure Design. The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes. No need to adjust the focus before engraving; the new laser focal spotis 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement.
410x400mm large area engraving interval can meet your various engraving needs. The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable.It is more convenient and quick to adjust the height of the laser. A10 PRO configures the terminal 32bit control panel, supports offline engraving, you can carry out engraving work anytime and anywhere without being restricted by the computer. In the event of an unexpected situation, stop the machine at any time to make the engraving safer. Wood\Bamboo\Cardboard\Plastic\Leather\ PCB board\Aluminum oxide\Non-reflective Electroplating layer and paint surface layer metal\304 mirror stainless steel\Glass\Ceramics\Cotton Cloth\Slate.
Cardboard\Non-woven fabric\20mm Wood board\15mm Acrylic\Some thin plastic board\Sponge. Win XP / Win 7 / Win 8 / XP / Win 10 /MacOSX system. NC BMP JPG PNG DXF, etc.
CE FCC RoHS FDA PSE. When operating the laser engraving machine, please install the laser protective cover.
If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand.Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object. Which may cause injury to the operator or burn the laser. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".
The seller is "atomstack_online" and is located in this country: CN. This item can be shipped worldwide.