12V 80W 445nm Laser Module for CNC Laser Engraving Cutting Machine Cutter

  
Blue laser module---a professional laser head with high speed and high stability. Bright blue light, easy to locate when carving. Fixed focus laser head, suitable for three-axis engraving machine, easy to install. Easy to assemble---small, compact, convenient and easy to install.

Air assist system: When performing laser cutting jobs, an air assist system blows air through the air nozzle, enhancing the cutting performance and reducing the burn marks. You can remove the air assist nozzle when you are doing non-cutter jobs.

This laser kit only comes with an air assist nozzle, to make full use of the air assist feature, you may need to prepare an air assist pump and air tubing yourself. Laser protective cover: It can effectively filter blue light and can work without wearing goggles. Directly engrave mirror stainless steel: no need painting black.

Super fast engraving speed: 304 stainless steel, up to 30mm/s with 45mm focus length. Remarkable cutting ability: cutting through 8-10mm thickness plywood by one pass at speed of 1.5mm/s. Original diode, high quality, 20,000 hours lifetime! Wavelength: 450nm, Input: DC 12V 3.8A, Support 5V PWM modulation, Input port: XH2.54-3P socket, control line installation method: pluggable. Suitable for DIY engraving machine.

Ceramics, Bone, MDF, Coated glass, Black acrylic, Plywood, Brushed stainless steel, Stone, Bamboo, Leather, Rubber, Alumina, Solid wood, etc. Unable to engrave: blue/purple/white/transparent material, aluminum without oxide layer. Effect Output Power: 80W(10W optical power). Electric Power: 12V 3.8A / 24V 1.7A.

Plywood, Pine board, Black acrylic, Leather, MDF, Ceramics, Bone, Coated glass, Mirror stainless steel, Brushed stainlesssteel, Stone, Bamboo, Rubber, Alumina, Solid wood. 8-10mm Plywood, 4-5mm Black acrylic, 4-5mm MDF, 8-10mm Pine board, 5-6mm Leather.

Newest Technology, High-energy, Ultra-fine Laser. Laser power can be 5W/10W according to the newest FAC and light refraction technology, the spot size is 0.080.08mm, can cut 5mm colorful acrylic & 8mm plywood, clearly engrave metal, ceramic, glass, stainless steel and so on.

Why is the title says 80W, but the Laser is 10W? 80w is the effective power of Laser machines, its actual laser output power should be 10W. Is it possible to engrave metal?

Yes, Our laser Engraver uses compressed spot technology with a spot size of only 0.08mm and supports engraving stainless steel and various coated metals. Is it possible to engrave glasses cups?

Yes, it can engrave glasses. Can this machine only cut dark acrylic?

Yes, the laser cutter can cut dark acrylic, but not transparent acrylic. Yes, there are user manual in paper in the box, also some assembly videos. Fixed focal length: After installing the red protective case, place the acrylic under the red case, fix the laser, and then remove the acrylic, this is the best engraving distance. Two engraving modes: the cutting mode is converted to engraving mode, the nozzle needs to be removed, and then the red protective shell is installed, and the focus is adjusted before use.