The Computerized Mini Laser Engraving and Cutting Machine is equipped with one 50W water cooling laser tube, high precise stepping motors, high quality control board , 20mm Reflection Mirror , 18mm 50 Focus Len, 50W Laser Power Supply , Laser tube protection Water protection. This machine employs an USB port and thus can be connected to your laptop or desktop. You can output data directly from coredraw software LaserWork. This machine can work well with multiple graphic formats including EMF/JPG/PLT/WMF.
Laser power: 50W Working area:19.69"x11.81" (5030cm) Laser type: co2 wave 1064um Engraving speed: 0-30000mm/min Cutting speed:0-2600mm/min. Lifting range: 0-300mm (0-11.81 inch) Support software: CorelDRAW and winsealXP Interface standard: USB 2.0 Laser coolingwater cooling Minimum shaping character :1mm. Recommends Accessories : 130044: Rotary Attachment Simpler 130004: Industrial Water Chiller 130114: Industrial Water Chiller Plastics & Rubber.
Acrylic is the most popular material to engrave using a laser system. It engraves and cuts very easily, comes in a wide variety of shapes and sizes, and can be relatively inexpensive. Acrylic comes in two forms, cast and extruded. Cast acrylic is used for almost all engraving.This is because the frost produced provides a nice white contrast against the clear material. Extruded acrylic remains clear when engraved but does not produce an adequate contrast.
However, extruded acrylic is ideal if you are going to vector cut only. Extruded acrylic is less expensive than cast and also has a lower melting point. The lower melting point produces an edge that looks flame finished when cut. Double-color plastic sheet is a kind of materials for engraving, which is widely applied to production of signboard, lighting advertising board, gift arts, information board, interior decoration and so on. The main processing way for double-color plastic sheet cover cutting, sawing, carving, gilding, laser-treating, bending and bonding.Wood engraving has been used widely in our life. It is very easy using the laser to produce sophisticated inlay work on wood, mother-of-pearl or even plastic. Veneers may be cut to size with special accuracy using the laser. The great advantage lies in the precision of the cut parts and also the controllability of the CAD or graphics programs. Positive and negative parts may be cut in very thin materials without correcting the cutting width. Mylar Airbrush Stencil Material Engraving. It's a kind of substrates to be cut by cutting plotter to form all kinds of figures and graph. The stencils are reusable, it can be used for T-shirt, wall, artwork, human body, and automotive applications.
It is made of Mylar. This rubber plate is made of two layers ofnatural rubber, can be cut by laser engraver to make stamp for commercial andpersonal use, especial for printing factory to print cartons and other packageboxes. Pay attention: Please set up mirror image when carving patterns. Non-woven fabric is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment. The term is used in the textile manufacturing industry to denote fabrics, such as felt, which are neither woven nor knitted.
Nonwoven materials typically lack strength unless densified or reinforced by a backing. In recent years, nonwovens have become an alternative to polyurethane foam. Red Rubber Stamp Material Engraving. Rubber stamping is quite simply the process of transferring and replicating an image.
Using a variety of inks and other mediums, the image on the stamp can be transferred onto a huge range of objects, transforming the ordinary into something special. Rubber stamps have been used widely now, our laser engraving machine can make a wonderful rubber stamp, which maybe start your new business.Rubber Sheet for Laser Engraver Engraving. This rubber plate with A4 size 2.3mm thicknes natural rubber, can be cut by laser engraver to make stamp for commercial and personal use. Smooth surface for quality results, easy cutting and engraving Suitable for finer sized prints, having a fine ink loading, precise printing Chemical, oil, abrasion resistance. 11.6"x8.26"x0.09/297x210x2.3mm. Self-Inking Rubber Stamp Holder and Inkpad.
Self-Inking Rubber Stamp works greatly and simply. We custom date, address, images and so on for you. Self Inking rubber stamp is for use in regular paper not for glossy papers. Use laser engraving machine, you can DIY all kinds of self ink rubber stamp. Sturdy and durable, saving cost 2.
Mark clearly, improve image 3. Convenient fuel injection, easy to carry 4. Panoramic window, precision positioning, increase efficiency 5. Custom date, address and all kinds of images to meet your needs Printing.
Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on.
If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately.
Usually you will wait 5-7 days after checkout for it to clear. The item "110V Ruida DSP 50W 3050 CO2 Laser Engraving Cutting Machine 11.8119.68 inch" is in sale since Friday, February 19, 2021. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "asctop40" and is located in Scarborough.
This item can be shipped to Canada, United States.