110V 6090 CO2 Laser Engraving Cutting Machine Engraver 80W Laser Tube DSP controller. This brand new CO2 laser engraver is suitable for various materials, such as mylar stencil material. Boulder, horns, leather, crystal, wood, organic plastic, abrics, paper. Film, canvas, rubber stamp material. The Computerized Mini Laser Engraving and Cutting Machine is equipped with one 80W water cooling laser tube, high precise stepping motors, high quality control board, 20mm Reflection Mirror(130027).
18MM 50 Focus Len(130017). 80W Laser Power Supply , 80W Laser Tube... This machine employs an USB port and thus can be connected to your laptop or desktop. You can output data directly from coredraw software WinsealXP, LaserDRW Don't support MOSHI Draw. This machine can work well with multiple graphic formats including EMF/JPG/PLT/WMF.
This machine comes with electric rise-down platform and 128M function of storage with offline working. (The carving files need to be stored in the first-level directory of the U disk, The machine will not recognize the files placed in the root directory). We have different types of laser engraver machine (40W, 50W, 60W and 100W). And offer all accessories and some materials (acrylic, double color sheet) for laser machine. Within one year, any fault caused by non-artificial reason we should maintain it freely.
We offer local service for hardware/software installation, optical path debugging and resolve customer in equipment using problems encountered. Laser power: 80W Working area:35.43"x23.62" (9060cm) Laser type: co2 wave 1064um Engraving speed: 0-30000mm/min Cutting speed:0-2600mm/min weight:230.5lb(180kg).Lifting range: 0-300mm Support software: LaserWork Interface standard: USB 2.0 Laser cooling:water cooling Minimum shaping character :1mm External dimensions:55.2"38.58"33.1(1409884cm). This brand new CO2 laser engraver is suitable for various materials, such as mylar stencil material, bamboo piece, double-color planks, rubber plate, boulder, horns, leather, crystal, wood, organic plastic, abrics, paper , film, canvas , rubber stamp material, Acrylic and Plastics. The Computerized Mini Laser Engraving and Cutting Machine is equipped with one 80W water cooling laser tube, high precise stepping motors, high quality control board. Main feature Adopt high q uality mainboard, chip and stepping belt which can control the engraving more precise Cooling system with coolen circular water. Blow away the waste and coolen proceed material surface The reinforced and thickened machine body make transportation safer. Using this button to adjust the electric current output. Refers to actual output electric currnet of the engraver. It is for the circulation of cooling water. To lengthen the service life of the laser tube , purified water is to promoted. Don't be suitable for Mac.
This machine is suitable to seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing and printing, paper product, garments sampling, large width tailoring, shoemaking, furniture, industry, craftwork, nameplates decorations, woodcut and other industries. Acrylic is the most popular material to engrave using a laser system. It engraves and cuts very easily, comes in a wide variety of shapes and sizes, and can be relatively inexpensive.Acrylic comes in two forms, cast and extruded. Cast acrylic is used for almost all engraving purposes. This is because the frost produced provides a nice white contrast against the clear material.
Extruded acrylic remains clear when engraved but does not produce an adequate contrast. However, extruded acrylic is ideal if you are going to vector cut only. Extruded acrylic is less expensive than cast and also has a lower melting point. The lower melting point produces an edge that looks flame finished when cut.Double-color plastic sheet is a kind of materials for engraving, which is widely applied to production of signboard, lighting advertising board, gift arts, information board, interior decoration and so on. The main processing way for double-color plastic sheet cover cutting, sawing, carving, gilding, laser-treating, bending and bonding. Wood engraving has been used widely in our life. It is very easy using the laser to produce sophisticated inlay work on wood, mother-of-pearl or even plastic.
Veneers may be cut to size with special accuracy using the laser. The great advantage lies in the precision of the cut parts and also the controllability of the CAD or graphics programs. Positive and negative parts may be cut in very thin materials without correcting the cutting width. Mylar Airbrush Stencil Material Engraving.
It's a kind of substrates to be cut by cutting plotter to form all kinds of figures and graph. The stencils are reusable, it can be used for T-shirt, wall, artwork, human body, and automotive applications. It is made of Mylar.
This rubber plate is made of two layers ofnatural rubber, can be cut by laser engraver to make stamp for commercial andpersonal use, especial for printing factory to print cartons and other packageboxes. Pay attention: Please set up mirror image when carving patterns. Non-woven fabric is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment.The term is used in the textile manufacturing industry to denote fabrics, such as felt, which are neither woven nor knitted. Nonwoven materials typically lack strength unless densified or reinforced by a backing. In recent years, nonwovens have become an alternative to polyurethane foam. Red Rubber Stamp Material Engraving. Rubber stamping is quite simply the process of transferring and replicating an image. Using a variety of inks and other mediums, the image on the stamp can be transferred onto a huge range of objects, transforming the ordinary into something special.
Rubber stamps have been used widely now, our laser engraving machine can make a wonderful rubber stamp, which maybe start your new business. Rubber Sheet for Laser Engraver Engraving.This rubber plate with A4 size 2.3mm thicknes natural rubber, can be cut by laser engraver to make stamp for commercial and personal use. Smooth surface for quality results, easy cutting and engraving Suitable for finer sized prints, having a fine ink loading, precise printing Chemical, oil, abrasion resistance.
11.6"x8.26"x0.09/297x210x2.3mm. Self-Inking Rubber Stamp Holder and Inkpad. Self-Inking Rubber Stamp works greatly and simply.
We custom date, address, images and so on for you. Self Inking rubber stamp is for use in regular paper not for glossy papers. Use laser engraving machine, you can DIY all kinds of self ink rubber stamp. Sturdy and durable, saving cost 2. Mark clearly, improve image 3.
Convenient fuel injection, easy to carry 4. Panoramic window, precision positioning, increase efficiency 5.
Custom date, address and all kinds of images to meet your needs Printing. Recommends Accessories : 130026: Laser Machine Rotary Attachment 130114: Industrial Water Chiller CW300 130058: Industrial Water Chiller CW5000 Plastics & Rubber.Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP.
Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. ECheck Issues: Payments via eCheck do not clear immediately.Usually you will wait 5-7 days after checkout for it to clear. The item "110V 6090 CO2 Laser Engraving Cutting Machine DSP Engraver 80W Laser Tube" is in sale since Tuesday, November 17, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "art_asc365" and is located in Scarborough, Ontario. This item can be shipped to Canada.